• News
• Novelties of automation

Novelties of automation

Dear colleagues! We’d like to present to your attention a comprehensive solution for heating systems automation based on the new products of the VALTEC range: VT.K500.0 zone controller and VT.AC801.0 room thermostat with RS-485 communication interface.

Main functions and possibilities of the system:
• support of data transmission via GSM and Wi-Fi;
• heating system remote control, setup and control via the VALTEC HEAT COMFORT mobile application and web interface;
• free configuration of the heating system to suit the needs of a specific facility;
• zonal control of room temperature using VT.AC801 room thermostats with RS-485 communication interface;
• possibility of control of two pumping-mixing units and combined heating (for example, radiators and underfloor heating) in eight rooms or of
• support of up to 16 independent temperature zones (heating circuits);
• possibility to connect up to 18 two-position electrothermal 24 V servo drives to the controller of normally closed or normally open version;
• possibility to control actuators in the discrete mode via relay outputs: pumps, boilers, water heaters, rotary valve drive, etc.;
• weather-dependent regulation of the heating medium temperature;
• setting up heating system schedules and operating modes;
• maintenance of connection with the device in case of pion (built-in power supply);
• possibility of control via a voice assistant (Alice).

VT.AC801 thermostat is equipped with a remote floor temperature sensor, has a built-in relay and can be used both as part of a system with VT.K500 zone controller and autonomously.